Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance
1 (800) 375-7520
or e-mail us at:
parts@staminaproducts.com
6
ASSEMBLY INSTRUCTIONS
STEP 1
Refer to the illustration. Position the
FRONT STABILIZER(2),
the short one, with its large holes next to the
FRONT FRAME(1)
and secure with
BUTTON HEAD BOLTS(M8x1.25x55mm)(57).
You can adjust the
LEVELING CAPS(49)
on the
REAR STABILIZER(4)
to keep the Recumbent
Bike stable.
STEP 3
Attach the
LEFT
and
RIGHT SEAT FRAMES(5, 6)
onto the both side of the
REAR FRAME(3)
with
BUTTON
HEAD BOLTS(M10x1.5x125mm)(58), WASHERS(M10)(82),
and
NYLOCK NUTS(M10x1.5)(72).
STEP 2
Loosen the
ADJUSTMENT KNOB(45)
on the
FRONT FRAME(1).
Slide the
REAR FRAME(3)
backward
and secure with the
ADJUSTMENT KNOB(45).
Attach the
REAR STABILIZER(4),
the one with the
LEVELING CAPS(49),
onto the
REAR FRAME(3)
with
CARRIAGE BOLTS(M8x1.25x65mm)(56), ARC
WASHERS(M8)(79), LOCK WASHERS(M8)(81),
and
ACORN NUTS(M8)(74).
NOTE:
Position the large
holes next to the
Front Frame(1).
