Stamina 15-4800R, Owner'S Manual

Place all parts from the box  in a cleared area and position them on the floor in front of you.  Remove all
packing materials from your area and place them back into the box.  Do not dispose of the packing materials
until assembly is completed.  Read each step carefully before beginning.  If you are missing a part please
call our toll-free number for assistance 

1 (800) 375-7520

 or e-mail us at:

parts@staminaproducts.com

ASSEMBLY INSTRUCTIONS

STEP 1:  

Attach the 

FRONT STABILIZER(2),

 the short one with the 

WHEELS(48),

 onto the front of the

FRONT FRAME(1)

 with 

CARRIAGE BOLTS(M8 x 75mm)(55), ARC WASHERS(M8)(71), LOCK

WASHERS(M8)(74),

 and 

ACORN NUTS(M8)(68).

STEP 2:  

Rotate the 

ADJUSTMENT KNOB(44)

 counter clockwise until the knob portion can be pulled.

Pull the 

ADJUSTMENT KNOB(44)

 and slide the 

REAR FRAME(3)

 backward.  Lock the 

REAR

FRAME(3)

 in position by inserting the pin of the 

ADJUSTMENT KNOB(44)

 into one of the adjustment

holes in the 

REAR FRAME(3),

 then rotate the 

ADJUSTMENT KNOB(44)

 clockwise to lock the 

REAR

FRAME(3)

 securely. 

Attach the 

REAR STABILIZER(4), 

the one with the 

LEVELING CAPS(49),

 onto

the 

REAR FRAME(3)

 with 

CARRIAGE BOLTS(M8 x 75mm)(55), ARC WASHERS(M8)(71), LOCK

WASHERS(M8)(74),

 and 

ACORN NUTS(M8)(68).

NOTE:

You can adjust the 

LEVELING CAPS(49)

 on the 

REAR STABILIZER(4)

 to keep the Recumbent

Bike stable.

6