Stamina 15-4825, Owner'S Manual

10

SET UP INSTRUCTIONS

Place the 

Magnetic Recumbent 4825 Bike

 in the area where it will be used. It is recommended that the

Magnetic Recumbent 4825 Bike

 be placed on an equipment mat. The 

Magnetic Recumbent 4825 Bike

is approximately 58 inches long (max.) x 26 3/4 inches wide x 31 3/4 inches tall. (These dimensions may
vary up to one inch.) An area 4 feet wide x 7 feet long is required for safe operation of the 

Magnetic

Recumbent 4825 Bike.

 Make sure that adequate space is available for access to and passage around the

Magnetic Recumbent 4825 Bike.

EQUIPMENT MAT
Please note the Rear Frame of the
Recumbent Bike is adjustable. Use the
longest size to determine the size of the mat.

Adjust the 

LEVELING CAPS(50)

 on the 

REAR STABILIZER(4)

 so that the Recumbent Bike

sits on the floor without rocking.

The 

Magnetic Recumbent 4825 Bike

 has a pair of 

WHEELS(49)

 on the 

FRONT STABILIZER

(2).

 Lift up from 

REAR STABILIZER(4)

 to move the 

Magnetic Recumbent 4825 Bike.

LEVELING:

MOVING:

FUNCTION INSPECTION:

Visually inspect the 

Magnetic Recumbent 4825 Bike

 to verify that assembly is as shown in the above

illustration. Check the function of the 

Magnetic Recumbent 4825 Bike

 by turning the crank slowly through

one complete revolution to verify that the drive train functions properly. Adjust the 

TENSION KNOB(25)

 and

verify that it functions properly.

Locate and read the 

WARNING LABEL(78)

 on the 

Magnetic Recumbent 4825 Bike.

 Make

sure that all users read the 

WARNING LABEL(78).

CAUTION: