background image

TABLE OF CONTENTS

Safety Instructions

  2

Before You Begin

  4

Equipment Warning & Notice Labels

  5

Hardware Identification Chart

  6

Assembly Instructions

  7

Set Up Instructions

 10

Operational Instructions

 11

Storage

 15

Maintenance

 15

Conditioning Guidelines

 16

Warm-up and Cool-Down

 17

Product Parts Drawing

 18

Parts List

 19

Warranty

 21

Notes

 22

Fax/Mail Ordering Form

 23

Page

Page

SAFETY INSTRUCTIONS

2

1.
2.
3.
4.

5.

6.

7.
8.

9.

10.

11.

12.

13.
14.
15.

16.

17.
18.

19.

20.
21.
22.
23.

Read all warnings posted on the 

Magnetic Recumbent 4825 Bike.

The 

Magnetic Recumbent 4825 Bike

 should only be used after a thorough review of the Owner's Manual.

We recommend that two people be available for assembly of this product.
Keep children away from the 

Magnetic Recumbent 4825 Bike.

 Do not allow children to use or play on the

Magnetic Recumbent 4825 Bike.

 Keep children and pets away from the 

Magnetic Recumbent 4825 Bike

when it is in use.
The 

Magnetic Recumbent 4825 Bike

 is not a freewheeling exercise bike; therefore, pedal speed should be

reduced in a controlled manner to prevent injury from spinning pedals.
Make sure the 

Magnetic Recumbent 4825 Bike

 is properly assembled and that all nuts and bolts are

tightened before use.
It is recommended that you place this exercise equipment on an equipment mat.
Set up and operate the 

Magnetic Recumbent 4825 Bike

 on a solid level surface. Do not position the

Magnetic Recumbent 4825 Bike

 on loose rugs or uneven surfaces.

Make sure that adequate space is available for access to and around the 

Magnetic Recumbent 4825 Bike.

Adjust the LEVELING CAPS(50) on the REAR STABILIZER(4) so that the bike sits on the floor without rocking.
Before using, inspect the 

Magnetic Recumbent 4825 Bike

 for worn or loose components, and securely

tighten or replace any worn or loose components prior to use.
Before using, always check the REAR FRAME(3) to be sure it is secure. The ADJUSTMENT KNOB(45)
must be inserted into one of the holes in the REAR FRAME(3) and securely tightened.
Each user should adjust the seat per instructions on page 11.
Do not attempt to adjust the seat while you are on the 

Magnetic Recumbent 4825 Bike.

Consult a physician prior to commencing an exercise program and follow his/her recommendations in
developing your fitness program. If at any time during exercise you feel faint, dizzy, or experience pain, stop
and consult your physician.
Always choose the workout which best fits your physical strength and flexibility level. Know your limits and
train within them. Always use common sense when exercising.
Do not wear loose or dangling clothing while using the 

Magnetic Recumbent 4825 Bike.

Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or cross
training shoes that fit well, provide foot support, and feature non-skid rubber soles.
Be careful to maintain your balance while using, mounting, dismounting, or assembling the 

Magnetic

Recumbent 4825 Bike,

 loss of balance may result in a fall and serious bodily injury.

The 

Magnetic Recumbent 4825 Bike

 should not be used by persons weighing over 300 pounds.

The 

Magnetic Recumbent 4825 Bike

 should be used by only one person at a time.

Do not ride the 

Magnetic Recumbent 4825 Bike

 while standing up.

The 

Magnetic Recumbent 4825 Bike

 is for consumer use only. It is not for use in public or semipublic

facilities.

This product contains a chemical known to the State of California to cause cancer and birth
defects or other reproductive harm.
Consult your physician before starting this or any exercise program. This is especially important
if you are over the age of 35, have never exercised before, are pregnant, or suffer from any
health problem. This product is for home use only. Do not use in institutional or commercial
applications. Failure to follow all warnings and instructions could result in serious injury or death.
To reduce the risk of serious injury, read the following Safety Instructions before using the

Magnetic Recumbent 4825 Bike.

Summary of Contents for 15-4825B
























Reviews: