SET UP INSTRUCTIONS
Place the
Magnetic Upright 5325 Bike
in the area where it will be used. It is recommended that the
Magnetic Upright 5325 Bike
be placed on an equipment mat. The
Magnetic Upright 5325 Bike
is
approximately 38 1/2 inches long x 22 inches wide x 52 inches tall. An area 4 feet wide x 5 feet long is
required for safe operation of the
Magnetic Upright 5325 Bike.
Make sure that adequate space is available
for access to and passage around the
Magnetic Upright 5325 Bike.
Adjust the
LEVELING CAPS(46)
on the
REAR STABILIZER(3)
so that the Bike sits on the
floor without rocking.
The
Magnetic Upright 5325 Bike
has a pair of
WHEELS(45)
on the
FRONT STABILIZER(2).
Grasp on the
HANDLEBAR(5)
and tip the
Magnetic Upright 5325 Bike
forward to move.
LEVELING:
MOVING:
11
FUNCTION INSPECTION:
Visually inspect the
Magnetic Upright 5325 Bike
to verify that assembly is as shown in the above illustration.
Check the function of the
Magnetic Upright 5325 Bike
by turning the crank slowly through one complete
revolution to verify that the drive train functions properly. Adjust the
TENSION KNOB(25)
and verify that it
functions properly.
Locate and read the
WARNING LABEL(70)
on the
Magnetic Upright 5325 Bike.
Make sure
that all users read the
WARNING LABEL(70).
CAUTION:
