ASSEMBLY INSTRUCTIONS
12
STEP 11
Refer to the inset drawing. Run the
CONNECTION WIRE(25)
through the hole in the plate on the
HANDLEBAR(4).
Attach the
HANDLEBAR(4)
to the
UPRIGHT(3)
with
BUTTON HEAD BOLT
(M8x1.25x40mm)(64)
and
FLAT HEAD SCREWS(M6x1x12mm)(69).
STEP 12
Install four AA batteries into the
COMPUTER(26).
Four batteries are included. See page 17 for detailed
battery installation instructions. Plug the
CONNECTION WIRE(25)
into the
EXTENSION WIRE
on the
COMPUTER(26).
Push the plugs and excess wires back into the
UPRIGHT(3)
and slide the
COMPUTER(26)
onto the plate on the
HANDLEBAR(4).
STEP 13
Attach the
MOUNTING BRACKET(93)
to the
UPRIGHT(3)
with
ROUND HEAD SCREWS(M4x0.7x15mm)
(75).
Place the
WATER BOTTLE(94)
in the
MOUNTING BRACKET(93).
Summary of Contents for 15-7100B
Page 22: ...PRODUCT PARTS DRAWING 22 FRONT BACK...
Page 25: ...25 NOTES...
