Stamina 15-9003B, Owner'S Manual

STORAGE

17

B

D

A

C

B

A

Grasp Here 

To Move

a.  Adjust and lock the seat in position with at least one adjustment hole visible in front of the seat.

  NOTE:

  This will prevent the seat from damaging the covers.

b.  Remove the 

PULL PIN(63)

 and swing the 

REAR SUPPORT(62) 

toward the front.

  NOTE:

  This will allow you to pull out the 

RELEASE KNOB(59)

 easily.

c.  Pull out the 

RELEASE KNOB(59)

 and fold up the 

RAIL(52).

 Make sure the 

RAIL(52)

 is locked securely 

in folded position by 

RELEASE KNOB(59).

d.  Lock the 

REAR SUPPORT(62)

 in folded position with the 

PULL PIN(63).

UNFOLD THE Conversion II

® 

9003

a.  Pull out the 

RELEASE KNOB(59)

 and unfold the 

RAIL(52).

 Make sure the 

RAIL(52)

 is locked securely 

in the unfolded position by 

RELEASE KNOB(59).

b.  Remove the 

PULL PIN(63)

 and swing the 

REAR SUPPORT(62) 

backward, then lock the 

REAR SUPPORT     

(62)

 in position with the 

PULL PIN(63).

1.  To store the 

Conversion II ® 

9003

,

 simply keep it in a clean dry place.

2.  To avoid damage to the electronics, remove the battery before storing the 

Conversion II ® 

9003

 for 

one year or more.

3.  Move  the

 Conversion II ® 

9003 

with  the 

MOVING WHEELS(76)

  on  the 

FRONT STABILIZER(2).

Grasp  the 

RAIL CAP(55)

  to  move  the 

Conversion II ® 

9003

.

  Do  not  use  the  Seat  to  move  the 

Conversion II ® 

9003

.

 The Seat will move and the Seat Carriage may pinch your hand or fingers.

4.  The minimum folded dimensions of the 

Conversion II ® 

9003

 are approximately 36.1 inches long x 

23 inches wide x 57.8 inches tall. Please measure your 

Conversion II ® 

9003

if exact dimensions are 

needed.

5.  Follow the illustrated process below to fold the 

Conversion II ® 

9003

.