11
SET UP INSTRUCTIONS
Place the
TOTAL BODY RECUMBENT BIKE
in the area where it will be used. It is recommended that
the
TOTAL BODY RECUMBENT BIKE
be placed on an equipment mat. The
TOTAL BODY
RECUMBENT BIKE
is approximately 49 5/8" long x 23 5/8" wide x 48 5/8" tall. (These dimensions may
vary up to one inch.) An area 4 feet wide x 6 feet long is required for safe operation of the
TOTAL BODY
RECUMBENT BIKE
.
Make sure that adequate space is available for access to and passage around the
TOTAL BODY RECUMBENT BIKE
.
Place the
TOTAL BODY RECUMBENT BIKE
on a flat surface and equipment mat to set it
on the floor without rocking. Adjust the
STAND(65)
under the
REAR FRAME(2)
to get
more support for the base of the
TOTAL BODY RECUMBENT BIKE.
The
TOTAL BODY RECUMBENT BIKE
has a pair of
WHEELS(76)
on the
FRONT
STABILIZER(8).
Lift up from
REAR STABILIZER(9)
to move the
TOTAL BODY
RECUMBENT BIKE
.
LEVELING:
FUNCTION INSPECTION:
Visually inspect the
TOTAL BODY RECUMBENT BIKE
to verify that assembly is as shown in the above
illustration. Check the function of the
TOTAL BODY RECUMBENT BIKE
.
Turn the pedal and then
handlebar slowly through one complete revolution to verify that the drive train functions properly. Adjust the
TENSION KNOB(21)
and verify that it functions properly.
Equipment Mat
MOVING:
Locate and read the
Warning Label(108)
on the
TOTAL BODY RECUMBENT BIKE
.
Make sure that all users read the
Warning Label(108).
CAUTION:
