OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
To increase the load, turn the
TENSION KNOB(21)
clockwise.
To decrease the load, turn the
TENSION KNOB(21)
counterclockwise. There are eight levels for the load adjustment.
NOTE:
The load will increase as you pedal faster.
13
STORAGE
1.
2.
3.
4.
To store the
TOTAL BODY RECUMBENT BIKE
simply keep it in a clean dry place.
The
TOTAL BODY RECUMBENT BIKE
is approximately 49 5/8" long x 23 5/8" wide x 48 5/8" tall.
These dimensions will vary. Please measure your
TOTAL BODY RECUMBENT BIKE
if exact
dimensions are needed.
To move the
TOTAL BODY RECUMBENT BIKE
,
lift the
REAR STABILIZER(9)
and use the
WHEELS(76)
on the
FRONT STABILIZER(8).
To avoid damage to the electronics, remove the batteries before storing the
TOTAL BODY
RECUMBENT BIKE
for one year or more.
MAINTENANCE
The safety and integrity designed into the
TOTAL BODY RECUMBENT BIKE
can only be maintained
when the
TOTAL BODY RECUMBENT BIKE
is regularly examined for damage and wear. Special
attention should be given to the following:
Adjust the
TENSION KNOB(21)
and verify that the Magnetic System provides tension. The Magnetic
System should provide many years of use.
Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that the
left pedal has left hand threads and is tightened by turning counterclockwise.
Verify that the Warning Label is in place and easy to read. Call Stamina Products immediately
(1-800-375-7520) for a replacement Warning Label if the Warning Label is missing or damaged.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged components shall be replaced immediately or the
TOTAL BODY RECUMBENT
BIKE
removed from service until repair is made.
Only Stamina Products supplied components shall be used to maintain/repair the
TOTAL BODY
RECUMBENT BIKE.
Keep your
TOTAL BODY RECUMBENT BIKE
clean by wiping with an absorbent cloth after use.
1.
2.
3.
4.
5.
6.
7.
