ASSEMBLY INSTRUCTIONS
8
NOTE:
Be careful not to damage the
PULSE SENSOR WIRES(104)
while doing assembly Step 8 and
Step 9.
STEP 7
Attach the
SEAT FRAME(6)
onto the
SEAT SUPPORT TUBE(5)
with
NYLOCK NUTS(M8)(80).
STEP 8
Attach the
HANDRAIL(7)
onto the
SEAT FRAME(6)
with
CARRIAGE BOLTS(M8 x 50mm)(99)
and
NYLOCK NUTS(M8)(80).
Run the
PULSE SENSOR WIRES(104)
through the upright of the
SEAT
FRAME(6)
and plug it into the socket on the
REAR FRAME(2).
STEP 9
Attach the
SEAT(36)
onto the
SEAT FRAME(6)
with
HEX BOLTS(M8 x 15mm)(97).
Attach the
BACK
CUSHION(35)
onto the
SEAT FRAME(6)
with
HEX BOLTS(M8 x 40mm)(96).
