Stamina 35-1052, Owner'S Manual

13

OPERATIONAL INSTRUCTIONS

In the setting mode, p

ress to set target values. Press the 

button and hold it down for two seconds, the meter will 

continue to add the values, 

release the

 button to stop.

USING THE FITNESS METER

POWER OFF:

Automatically shuts off after 4 minutes of 

inactivity.

POWER  ON:

FUNCTIONS:

FUNCTION BUTTONS :

MODE :

In the setting mode, press and release to select each 

function for preset target values for 

TIME, COUNT, 

and

CALORIES.

Press and release to select functions for display for 

TIME, COUNT, CALORIES,

 and 

TOTAL COUNT.

In the setting mode, press the button to reset the setting 

values to zero.

Press the button and hold it down for two seconds to 

reset all functions to zero

, except 

TOTAL COUNT.

RESET :

Move the seat or press any button.

SET :

Automatically scans 

TIME, COUNT, 

and

 CALORIES

 in sequence with a change every 

six seconds. Press and release the 

MODE

 button until 

“SCAN”

 appears on display.

Displays the time from 1 sec. up to 99:59 minutes. Counts down from preset value.
Displays the total number of rows you have taken from zero to 9999 rows. Counts down 
from preset value.
Displays the calorie burned from zero to 999.9 Kcal. Counts down from preset value.
The calorie readout is an estimate for an average user. It should be used only as a 
comparison between workouts on this unit.
Displays the total accumulated number of rows you have taken, from zero to 9999  

rows. The total accumulated rows is retained when the meter is turned off.

SCAN:

TIME:

COUNT

:

CALORIES:

TOTAL COUNT

:

PRESET VALUES OPERATION:

You can move the 

SEAT

(42)

 to power on the meter and workout with the meter directly. Or, you can preset 

the function values for counting down. Press and release the 

MODE

 button until 

“SCAN”

 does not appear 

on display, the meter will 

enter

 setting mode. Use 

SET

 and 

RESET

 buttons to input the values, and press 

MODE

 button to confirm. Or, just press the 

MODE

 button to skip the setting and move on to the next function. 

After all the desired settings are chosen, begin pulling on the handlebars to start the workout.

Time (1:00 to 99:00)  

  Count (10 to 9990)  

  Calories (1 to 999.0 Kcal)