ASSEMBLY INSTRUCTIONS
8
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at
customer.care@staminaproducts.com
, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Lay the Main Frame Assembly on the floor as shown in the illustration. Now refer to inset drawing A. Make
sure the Key Rib in the
STABILIZER CAP(5)
aligns with the slot in the
REAR SUPPORT(4),
then press the
STABILIZER CAP(5)
onto the
REAR SUPPORT(4).
Turn the Main Frame Assembly to the normal upright
position and make sure the
STABILIZER PAD(6)
is secured to the
STABILIZER CAP(5).
Key Rib
A.
Summary of Contents for 35-1052
Page 2: ......
