ASSEMBLY INSTRUCTIONS
STEP 8
There is an
“L”
decal on the left
PEDAL CAP(43L),
and an
“R”
decal on the right
PEDAL CAP(43R).
Insert
the
PEDAL SHAFT(6)
through the tube located on the
MAIN FRAME(1).
Slide the left
PEDAL CAP(43L)
onto the left side of the
PEDAL SHAFT(6).
Slide the right
PEDAL CAP(43R)
onto the right side of the
PEDAL SHAFT(6).
Then secure the
PEDAL CAPS(43)
with
BUTTON HEAD BOLTS(M8x1.25x15mm)
(66), LOCK WASHERS(68),
and
FENDER WASHERS(M8)(96)
at both ends of the
PEDAL SHAFT(6).
You need to use two Allen Wrenches to tighten the
BUTTON HEAD BOLTS(M8x1.25x15mm)(66)
at both
ends of the
PEDAL SHAFT(6)
at the same time.
STEP 9
Refer to detail view. Plug the
ADAPTER(56)
into the
SOCKET
of the
POWER WIRE(107)
located on the
front of the rower. Plug the
ADAPTER(56)
into an electrical outlet.
11
96
68
66
96
66
68
43L
43R
1
56
107
6
L
R
