Stamina 55-1532, Owner'S Manual

13

STORAGE

FOLDING THE INVERSION TABLE

The 

Gravity Inversion Therapy Table

 can be easily folded for storage.

To fold the 

Gravity Inversion Therapy Table

 loosen the 

LOCKING KNOB(19)

 and pull out the 

LARGE

SPRING PIN(18).

  Now, slide the 

HEIGHT ADJUSTMENT BEAM(6)

 all the way up into the 

MAIN FRAME(4)

until the 

ADJUSTABLE INSTEP FRAME(7)

 is just below the 

MAIN FRAME(4),

 release the 

LARGE SPRING

PIN(18)

 and slide the 

HEIGHT ADJUSTMENT BEAM(6)

 slightly up or down until the spring pin locks the

beam in place.  Remove the 

MAIN FRAME ASSEMBLY

 from the 

BASE

 by lifting up on the 

MAIN FRAME(4)

until the 

PIVOT ARMS(5)

 come out of the slots located at the top of the 

REAR FRAME(2),

 (Make sure the

NYLON STRAP

 is not attached to the 

MAIN FRAME(4)

 before attempting to remove it.)  Push up on the

center of the 

FOLDING LINKAGES(3)

 and push the 

FRONT FRAME(1)

 and 

REAR FRAME(2)

 together

until they meet.

MAINTENANCE INSTRUCTIONS

The safety level of the 

Gravity Inversion Therapy Table

 can be maintained only if it is examined regularly

for damage and wear.

Check the warning label, nylon strap, strap buckle, pivot arms, nylon bed, Foam Pads, heel holders,
small spring pin and large spring pin for damage and wear.
Replace damaged and worn components immediately and/or keep the equipment out of use until repairs
are completed.

1.

2.