Stamina 55-1703, Owner'S Manual

CAUTION: 

Locate and read the 

CAUTION LABEL(89)

 on the 

Stamina® Elliptical Trainer 703.

 Make 

sure that all users read the 

CAUTION LABEL(89)

 before using the product.

SET UP INSTRUCTIONS

13

Equipment Mat

FUNCTION INSPECTION:

Visually inspect the 

Stamina® Elliptical Trainer 703

 to verify that assembly is as shown in the above 

illustration. Check the function of the 

Stamina® Elliptical Trainer 703,

 stand on the 

PEDAL CAPS(33, 34)

and place your hands at a comfortable position on the 

HANDLEBARS(4, 5).

 Slowly move the crank through 

one complete revolution to verify that the drive train functions properly. Adjust the 

TENSION KNOB(29)

 and 

verify that it functions properly and the resistance changes.

LEVELING: 

Adjust the 

LEVELING CAPS(39)

 on the 

REAR STABILIZER(6)

 so the 

Stamina® Elliptical 

Trainer 703

 sits on the floor without rocking. Remove and reposition the 

LEVELING 

CAPS(39)

 on the 

REAR STABILIZER(6)

 to level the 

Stamina® Elliptical Trainer 703.

MOVING: 

The

 Stamina® Elliptical Trainer 703

 has a pair of Wheels in the 

WHEEL CAPS(38)

 on 

the 

FRONT STABILIZER(3).

 Grasp on the 

STATIONARY 

HANDLEBAR(26)

 and tip the 

Stamina® Elliptical Trainer 703

forward to move.

Place the 

Stamina® Elliptical Trainer 703

 in the area where it will be used. It is recommended that the 

Stamina® Elliptical Trainer 703

 be placed on an equipment mat. The maximum operation dimensions of 

the 

Stamina® Elliptical Trainer 703

 are approximately 46.3 inches long x 25.7 inches wide x 63 inches 

tall. (These dimensions may vary up to one inch.) Make sure that adequate space is available for access 

to move around and emergency dismount from the 

Stamina® Elliptical Trainer 703.

 A minimum of 20 

inches on at least one side and 20 inches either behind or in front of the 

Stamina® Elliptical Trainer 703 

is required for safe operation.