Stamina 55-4690, Owner'S Manual

7

ASSEMBLY INSTRUCTIONS

   Place all parts from the box  in a cleared area and position them on the floor in front of you.  Remove all
packing materials from your area and place them back into the box.  Do not dispose of the packing materials
until assembly is completed.  Read each step carefully before beginning.  If you are missing a part please
call our toll-free number for assistance 

1 (800) 375-7520

 or e-mail us at :

parts@staminaproducts.com

STEP 1

Remove your 

AeroPilates  Premier 690 

from its packaging placing the product on its side, with the 

LOCKING

PIN(29)

 side upward. Remove the 

LOCKING PIN(29)

 and unfold the 

MAIN FRAME ASSEMBLY

 separating

the half that has the attached 

LOCKING PIN(29).

 When completed, the frame should be separated

approximately three feet at the end.

STEP 2

Attach the four 

RUBBER FEET(28)

 to the 

FRONT FRAME(1)

 and 

REAR FRAME(2)

 with 

ROUND HEAD

SCREWS(M5x0.8x25mm)(38).

 Attach the 

WHEELS(27)

 to the 

FRONT FRAME(1)

 with 

WASHERS(M8)(47)

and 

NYLOCK NUTS(M8x1.25)(42).

STEP 3

Unfold your 

AeroPilates  Premier 690

 to a flat position by moving the 

FRONT FRAME(1)

 away from the

platform end of the product in a clockwise position until fully extended.