SET UP INSTRUCTIONS
Place the
7000 EMR Premium Magnetic Bike
in the area where it will be used. The
7000 EMR
Premium Magnetic Bike
is approximately 33 1/8" long x 20 1/8" wide x 52" tall. (These dimensions may
vary up to one inch.) An area 4 feet wide x 5 feet long is required for safe operation of the
7000 EMR
Premium Magnetic Bike
.
Make sure that adequate space is available for access to and passage around
the
7000 EMR Premium Magnetic Bike
.
10
Adjust the
LEVELING CAPS(47)
on the
REAR STABILIZER(3)
so that the bike sets on
the floor without rocking.
The
7000 EMR Premium Magnetic Bike
has a pair of transport
WHEEL CAPS(46)
built
into the
FRONT STABILIZER(2).
Grip the
HANDLEBAR(5)
and tip the
7000 EMR
Premium Magnetic Bike
forward to move.
LEVELING:
MOVING:
FUNCTION INSPECTION:
Visually inspect the
7000 EMR Premium Magnetic Bike
to verify that assembly is as shown in the above
illustration. Check the function of the
7000 EMR Premium Magnetic Bike
.
Turn the crank slowly
through one complete revolution to verify that the drive train functions properly. Adjust the
TENSION
KNOB(29)
and verify that it functions properly.
CAUTION:
Locate and read the
WARNING LABEL(75)
on the
7000 EMR Premium Magnetic Bike
.
Make sure that all users read the
WARNING LABEL(75).
