Stamina 75-0005A, Owner'S Manual

26 

Washer (M8)   

    3

Part Number and Description   

 Qty

15 

Bolt, Button Head (M8 x 1.25 x 18mm) 

    3

6

length

length

mm.

in.

INCHES

This chart is provided to help identify the fasteners used in the assembly process. Place the washers or 

the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to 

check the length of the bolts and screws.

NOTICE: 

The length of all bolts and screws, except those with flat 

heads, is measured from below the head to the end of the bolt 

or screw. Flat head bolts and screws are measured from the 

top of the head to the end of the bolt or screw.

After unpacking the unit, open the hardware bag and make sure that you have all the following 

fasteners. Some fasteners may be already attached to the parts.

MILLIMETERS

0      10     20     30     40     50     60     70     80     90    

100    

110    

120    

130    140    

150

0         1/2         

1         1/2         

2         1/2         

3         1/2         

4         1/2         

5         1/2         

6

6 

  8 

10 

12

3/16" 

1/4"     

5/16"        3/8"             1/2"

HARDWARE IDENTIFICATION CHART

13 

Bolt, Button Head (M8 x 1.25 x 35mm) 

    3