ASSEMBLY INSTRUCTIONS
9
STEP 5
Slide the
UPRIGHT SLEEVE(34)
over the
UPRIGHT(3).
Insert the
TENSION CABLE(40)
through the
UPRIGHT(3)
until the
TENSION CABLE(40)
is through and extends out of the square opening in the
side of the
UPRIGHT(3).
Connect the
CONNECTION WIRE(41)
to the
SENSOR WIRE(39).
Insert the
UPRIGHT(3)
into the
MAIN FRAME(1)
and secure with
BUTTON HEAD BOLTS(M8x1.25x20mm)(49),
LOCK WASHERS(M8)(66),
WASHERS(M8)(63),
and
ARC WASHERS(M8)(65).
Slide down the
UPRIGHT
SLEEVE(34)
to cover the bolt heads.