ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the
FRONT STABILIZER(2),
the short one with the
ENDCAPS(36),
to the front of the
FRONT
FRAME(1)
with
CARRIAGE BOLTS(M8x1.25x65mm)(47), ARC WASHERS(M8)(65), LOCK WASHERS(M8)
(67),
and
ACORN NUTS(M8x1.25)(61).
STEP 3
Attach the
LEFT
and
RIGHT SEAT FRAMES(5, 6)
to both sides of the
REAR FRAME(3)
with
BUTTON
HEAD BOLTS(M10x1.5x122mm)(49), WASHERS(M10)(69),
and
NYLOCK NUTS(M10x1.5)(59).
STEP 2
Unscrew to remove the
ADJUSTMENT KNOB(37)
from the
FRONT FRAME(1).
Slide the
REAR FRAME(3)
backward and secure with the
ADJUSTMENT KNOB(37).
Attach the
REAR STABILIZER(4),
the one with
the
LEVELING CAPS(40),
to the
REAR FRAME(3)
with
CARRIAGE BOLTS(M8x1.25x65mm)(47), ARC
WASHERS(M8)(65), LOCK WASHERS(M8)(67),
and
ACORN NUTS(M8)(61).
NOTE:
You can adjust the
LEVELING CAPS(40)
on the
REAR STABILIZER(4)
to keep the Recumbent
Bike stable.
Meijer.com
