SEAT ADJUSTMENT
LOAD ADJUSTMENT
CAUTION:
1.
Do not attempt to adjust the seat while you are on the
AVARI® Recumbent Bike.
2. Always securely tighten the
LOCKING KNOB(59)
after adjusting the seat to a new position.
1. Loosen but do not remove the
LOCKING KNOB(59)
to unlock the
SEAT CARRIAGE(5).
Slide
the
SEAT ASSEMBLY
forward or backward to adjust the seat, and securely tighten the
LOCKING
KNOB(59)
after adjusting the seat to a new position. Refer to the illustration below.
2. Sit on the seat and place your feet on the pedals. You should be able to move through a complete
pedal stroke without locking your knees or shifting your hips on the seat. The seat is too close to the
pedals if you have more than a slight bend in your knees at the bottom of the pedal stroke. The seat
is too far from the pedals if you have to completely straighten your knees at the bottom of the pedal
stroke.
Proper seat adjustment is important.
To increase the load, turn the
TENSION KNOB(8)
clockwise. To decrease the load, turn the
TENSION
KNOB(8)
counterclockwise. There are eight levels for the load adjustment.
OPERATIONAL INSTRUCTIONS
13
Summary of Contents for A150-210
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK ...
Page 22: ...NOTES 22 ...