Stamina A150-210, Owner'S Manual

The safety and integrity designed into the 

AVARI® Recumbent Bike

 can only be maintained when the 

AVARI® Recumbent Bike

  is  regularly  examined  for  damage  and  wear.  Special  attention  should  be 

given to the following:

1.  Adjust the 

TENSION KNOB(8)

 and verify that the resistance changes.

2.  Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that 

the left pedal has left hand threads and is tightened by turning counterclockwise.

3.  Verify  that  all  nuts  and  bolts  are  present  and  properly  tightened.  Replace  missing  nuts  and  bolts. 

Tighten loose nuts and bolts.

4.  Verify that the 

WARNING LABEL(75)

 is in place and easy to read. Call Stamina Products immediately 

at 

1-800-375-7520

 for a replacement 

WARNING LABEL(75)

 if it is missing or damaged.

5.  It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

6.  Worn  or  damaged  components  shall  be  replaced  immediately  or  the 

AVARI® Recumbent Bike

removed from service until repair is made.

7.  Only  Stamina  Products  supplied  components  shall  be  used  to  maintain/repair  the 

AVARI® 

Recumbent Bike.

8.  Keep your 

AVARI® Recumbent Bike

 clean by wiping it off with an absorbent cloth after use.

STORAGE

MAINTENANCE

15

1.  To store the 

AVARI® Recumbent Bike,

 simply keep it in a clean dry place.

2.  The 

AVARI® Recumbent Bike

 is approximately 49.6 inches long x 24 inches wide x 39.4 inches tall. 

These dimensions will vary. Please measure your 

AVARI® Recumbent Bike

 if exact dimensions are 

needed.

3.  Lift the 

AVARI® Recumbent Bike

 by the 

HANDLEBAR(10)

 and 

REAR STABILIZER(4)

 to move. Two 

people are required to move the 

AVARI® Recumbent Bike.

4.  To  avoid  damage  to  the  electronics,  remove  the  batteries  before  storing  the 

AVARI® Recumbent 

Bike

 for one year or more.