ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the
FRONT STABILIZER(3),
the shorter stabilizer with the
ENDCAPS(17),
to the front of the
MAIN FRAME(1)
with
CARRIAGE BOLTS(M8x1.25x65mm)(19), WASHERS(M8)(49),
and
ACORN
NUTS(M8x1.25)(74).
STEP 2
Attach the
REAR STABILIZER(4),
the stabilizer with the
LEVELING CAPS(18),
to the
MAIN FRAME(1)
with
CARRIAGE BOLTS(M8x1.25x65mm)(19), WASHERS(M8)(49),
and
ACORN NUTS(M8x1.25)(74).
NOTE:
You can adjust the
LEVELING CAPS(18)
on the
REAR STABILIZER(4)
to keep the Recumbent
Bike stable.
Summary of Contents for A150-210
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK ...
Page 22: ...NOTES 22 ...