ASSEMBLY INSTRUCTIONS
11
STEP 6
Slide the
SEAT(66)
onto the
RAIL(2).
Attach the
STOPPER BUMPER(56)
to the
RAIL(2)
with
BUTTON
HEAD BOLTS
(M8x1.25x25mm)
(22).
Also, please verify that the other
STOPPER BUMPER(56)
has already
been assembled at the factory. If it has not been pre-assembled, then please assemble at this time
.
STEP 7
Attach the
REAR STAND(3)
to the
RAIL(2)
with a
HEX BOLT(M8x1.25x15mm)(59)
and a
LOCK
WASHER(M8)(34)
from inside the
RAIL(2)
and two
FLAT HEAD BOLTS(M8x1.25x15mm)(57)
from
underneath. Tighten all three bolts only after all three have been started. Press the
RAIL CAP(53)
into the
back end of the
RAIL(2).
(Assembled at the factory)
