13
NOTE:
1. Use your hand or a simple tool to pry the
METER(39)
from the side
covers.
2. The meter operates with two AA batteries (1.5V each), the batteries
are not included. Refer to the illustration to install or replace the
batteries.
HOW TO INSTALL AND REPLACE BATTERIES:
Pull the
HANDLEBAR(16)
or push the
MODE
button.
Automatically shuts off after four minutes
of inactivity.
POWER OFF :
POWER ON :
Press to select the function value displays of
TIME, SPEED,
DISTANCE,
and
CALORIES.
Reset all functions to zero by pressing the button and holding
it down for three seconds.
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline
battery with another type of battery.
3. Rechargeable batteries are not recommended.
4. Ultimate disposal of battery should be handled
according to all state and federal laws and regulations.
5. Do not dispose of batteries in fire.
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
CALORIES:
TIME:
Automatically scans each function of
TIME, SPEED, DISTANCE,
and
CALORIES
in
sequence with change every four seconds. Press and release the
MODE
button until
“SCAN”
appears on the display.
Displays the time from one second up to 99:59 minutes.
Displays the current speed from zero to 999.9 miles per hour.
Displays the distance from zero to 99.99 miles.
Displays the calories burned from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
SPEED:
FUNCTIONS:
SCAN:
DISTANCE:
MODE BUTTON:
The meter will shut off automatically after four minutes of inactivity. All function values
will be kept. You can continue to workout with these function values, or press the
MODE
button and hold it down for three seconds to reset all functions to zero.
NOTE:
AA Batteries
