ASSEMBLY INSTRUCTIONS
10
STEP 7
To assemble the
HANDLEBAR(10),
run the
PULSE SENSOR WIRES(63)
through the hole on the
UPRIGHT(2)
and come out from the opening on the top. Attach the
HANDLEBAR(10)
to the
UPRIGHT(2)
with
BUTTON HEAD BOLTS(M8x1.25x15mm)(48)
and
ARC WASHERS(M8)(49).
STEP 8
Install two AA batteries into the
METER(14),
the batteries are not included. See page 13 for detailed
battery installation instructions. Plug the
EXTENSION WIRE(38)
and
PULSE SENSOR WIRES(63)
into
the
METER(14),
and push the excess wires back into the
UPRIGHT(2).
Slide the
METER(14)
onto the top
of the
UPRIGHT(2).
NOTE:
Be careful not to damage the wires when attaching the
METER(14)
to the
UPRIGHT(2).
Summary of Contents for AVARI Upright Bike
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Page 21: ...NOTES 21...
