ASSEMBLY INSTRUCTIONS
8
Thread the
RIGHT PEDAL(31)
into the right side of the
CRANK(6).
Thread the
LEFT PEDAL(30)
into the
left side of the
CRANK(6).
Tighten the pedals securely.
STEP 4
Refer to detail view
A.
Remove the
LOCKING KNOB(62)
from the
SEAT SLIDER(59).
Push the Threaded
Rod of the
SECURING BRACKET(61)
into the slot of the
SEAT SLIDER(59)
and hold at the position, then
slide the
SEAT SLIDER(59)
into the
SEAT POST(3).
Refer to detail view
B.
Continue to slide the
SEAT
SLIDER(59)
slowly until the Threaded Rod of the
SECURING BRACKET(61)
drops and goes through the
hole in the
SEAT POST(3),
then secure with the
LOCKING KNOB(62).
STEP 5
NOTE:
The
RIGHT PEDAL(31)
has
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL(31)
has
right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(30)
has
L
stamped on
the end of the pedal shaft. The
LEFT PEDAL(30)
has left hand threads and is tightened by turning
counterclockwise.
B.
(Threaded Rod)
A.
(Threaded Rod)
Summary of Contents for AVARI Upright Bike
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Page 21: ...NOTES 21...
