Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning. If you
are missing a part please call our toll-free number for assistance
1-800-375-7520
or e-mail us at
customerservice@staminaproducts.com.
ASSEMBLY INSTRUCTIONS
7
STEP 1
Attach the
LEFT
and
RIGHT UPRIGHTS(2, 3)
to the
BASE FRAME(1)
with
HEX BOLTS(M10x1.5x50mm)
(33)
and
WASHERS(M10)(43). DO NOT TIGHTEN COMPLETELY.
STEP 2
Connect the
LOWER EXTENSION WIRE(24)
located on the
LEFT UPRIGHT(2)
to the
SENSOR WIRE(25).
