ASSEMBLY INSTRUCTIONS
9
STEP 4
Insert the
LOCKING KNOB(5)
through the
LEFT UPRIGHT(2)
and screw into the hole in the
BASE
FRAME(1)
to lock the
BASE FRAME(1)
in position.
STEP 5
Install two AAA batteries into the
METER(21),
the batteries are not included. See page 10 for detailed battery
installation instructions. Slide the
METER(21)
onto the plate on the
U-SHAPED HANDRAIL(4).
Connect
the
UPPER EXTENSION WIRE(23)
to the
METER(21).
STEP 6
Attach the
BUMPER STANDS(17)
to the bottom of the
BASE FRAME(1).
NOTE:
The
BUMPER STANDS(17)
may be stored on the end of the
BASE FRAME(1)
to increase the
angle of the treadmill and reduce the walking resistance. See page 12 for details on adjusting the
walking resistance.
