8
STEP 1
Position the main assembly of the
Stamina® DT Rowing Machine 397
as shown in the illustration
below. Attach the
FRONT STABILIZER(3)
to the
MAIN FRAME(1)
with
BUTTON HEAD BOLTS
(M8x1.25x75mm)(97), LOCK WASHERS(M8)(68),
and
ARC WASHERS(M8)(98).
Attach the
OVAL
ENDCAP
(62)
to the
MAIN FRAME(1)
with
ROUND HEAD BOLT(M6x1x12mm)(99).
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
97
98
68
3
1
99
62
Shorter side
Summary of Contents for DT 397
Page 2: ......
Page 22: ...NOTES 22...
