FUNCTION INSPECTION:
Visually inspect the
AIR BIKE 955
to verify that assembly is as shown in the above illustration. Check the
function of the
AIR BIKE 955.
Turn the crank slowly through one complete revolution to verify that the drive
train functions properly. Adjust the
TENSION KNOB(27)
and verify that it functions properly.
CAUTION:
SET UP INSTRUCTIONS
Place the
AIR BIKE 955
in the area where it will be used. It is recommended that the
AIR BIKE 955
be
placed on an equipment mat. The
AIR BIKE 955
is approximately 42 1/2" long x 22 1/4" wide x 45 1/4" tall.
(These dimensions may vary up to one inch.) An area 4 feet wide x 6 feet long is required for safe operation
of the
AIR BIKE 955.
Make sure that adequate space is available for access to and passage around the
AIR
BIKE 955.
Adjust the
LEVELING CAPS(48)
on the
FRONT STABILIZER(3)
so that the bike sets on
the floor without rocking. Remove and reposition the
LEVELING CAPS(48)
on the
FRONT
STABILIZER(3)
to level the
AIR BIKE 955.
The
AIR BIKE 955
must be lifted for movement. Two people may be required.
LEVELING:
MOVING:
10
Locate and read the
WARNING LABEL(73)
on the
AIR BIKE 955.
Make sure that all users
read the
WARNING LABEL(73).
