background image

STORAGE

To store the 

AIR BIKE 955

 simply keep it in a clean dry place.

The 

AIR BIKE 955

 is 42 1/2" long x 22 1/4" wide x 45 1/4" tall.

The 

AIR BIKE 955

 must be lifted for movement. Two people may be required.

To avoid damage to the electronics, remove the batteries before storing the 

AIR BIKE 955

 for one year or

more.

1.
2.
3.
4.

14

MAINTENANCE

The safety and integrity designed into the 

AIR BIKE 955

 can only be maintained when the 

AIR BIKE 955

 is

regularly examined for damage and wear.  Special attention should be given to the following:

Verify that the Thin Nuts(35) are properly tightened to prevent the pedals from coming loose.
Verify that the Warning Label is in place and easy to read.  Call Stamina Products immediately
(1-800-375-7520) for a replacement Warning Label if the Warning Label is missing or damaged.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged components shall be replaced immediately or the 

AIR BIKE 955

 removed from service

until repair is made.  Only Stamina Products supplied components shall be used to maintain/repair the 

AIR

BIKE 955.

Keep your 

AIR BIKE 955

 clean by wiping with an absorbent cloth after use.

1.
2.

3.
4.

5.

PROBLEM

CORRECTION

Replace Batteries. (Use Two
AA.)

1.

CAUSE

Batteries Weak Or Dead.

1.

No Display On Monitor.

1.

Securely Plug Pickup Wire Into
Back Of Monitor.

Replace Speed Pickup.

Replace Monitor.

Adjust Chain - See Page 15
Chain Adjustment.

1.

2.

3.

1.

Pickup Wire Not Connected To
Monitor.

1.

Speed Pickup Not Working
Properly.

2.

Monitor Not Working Properly.

3.

Chain Is Too Loose.

1.

No Speed Or Distance Displays
On Monitor.

2.

Chain Makes Popping Noise.

3.

1.

1.

4.

Adjust Chain

Chain is too loose and hits fan.

Bike makes sudden loud noise.

Fan needs adjustment.

1.

Resistance too high.

6.

Adjust fan per instructions on
page 15 and 16.

1.

Bike Is Not Level.

1.

Bike Rocks As You Pedal.

Adjust Leveling Caps On Front
Stabilizer Until Bike Is Level.

1.

5.

TROUBLE SHOOTING GUIDE

IT IS NOT NECESSARY TO RETURN ENTIRE BIKE FOR A MONITOR REPAIR.

THE MONITOR IS REMOVABLE FROM BIKE FOR REPAIR OR REPLACEMENT.

Summary of Contents for Dual-Action 955
























Reviews: