ASSEMBLY INSTRUCTIONS
R
8
STEP 7
There is a
"R"
decal on the
RIGHT HANDLEBAR(7)
and
RIGHT LOWER BAR ASSEMBLY(8).
Attach
the
LOWER BAR(8)
to the
RIGHT HANDLEBAR(7)
with
ROUND HEAD BOLTS(M6 x 12mm)(59)
and
ARC WASHERS(M6)(70).
Repeat to assemble the
LEFT HANDLEBAR(6).
STEP 8
Slide the
AXLE(36)
through
BUSHINGS(37)
into the
MAIN FRAME(1).
Slide the two
BUSHING
WASHERS(38)
onto both sides of the
AXLE(36).
Slide the
LEFT
and
RIGHT HANDLEBARS(6, 7),
with the
GRIPS
facing outside, onto
AXLE(36)
and fasten with
LARGE WASHERS(M8)(39)
and
NYLOCK
NUTS(M8)(62).
Place a
NUT CAP(40)
onto the
NYLOCK NUT(M8)(62)
on both sides.
STEP 9
Slide the two
FOAM GRIPS(41)
onto the
LEFT
and
RIGHT
HANDLEBARS(6, 7).
NOTE:
R
Lubricate the
LEFT
and
RIGHT HANDLEBARS(6, 7)
with a small amount of liquid soap for easier
installation of
the
FOAM GRIPS(41).
