ASSEMBLY INSTRUCTIONS
Slide the two
PEDAL WASHERS(33)
onto both
PEDAL SHAFTS
of
PEDALS(31, 32).
Insert
PEDAL SHAFTS
of
PEDALS(31, 32)
through the
LINKAGES(9).
Slide
SPACERS(34)
onto
PEDAL SHAFTS.
WARNING:
SPACERS(34)
must be between
LINKAGES(9)
and
CRANK(10)
so that there will be enough
clearance between
LINKAGES(9)
and
CRANK(10).
Thread
PEDAL SHAFTS
of
PEDALS(31, 32)
into
CRANK(10)
and tighten.
Hold
PEDAL SHAFTS
and thread
THIN NUTS(1/2")(35)
onto
PEDAL SHAFTS.
Tighten
PEDAL SHAFTS
and
THIN NUTS(1/2")(35)
until
THIN NUTS(1/2")(35)
are tight against
CRANK(10).
a.
b.
c.
d.
e.
f.
The
RIGHT PEDAL(32)
has
R
marked on the bottom side of the pedal. The
LEFT PEDAL(31)
has
L
marked on the bottom side of the pedal. Both
PEDALS(31, 32)
have
RIGHTHAND THREADS.
Tighten both
PEDALS(31, 32)
by turning clockwise.
STEP 10
NOTE:
IMPORTANT
STUDY THE ABOVE ILLUSTRATION AND READ ALL OF STEP 10 "a" through "f"
BEFORE ATTACHING PEDALS AND CONNECTING LINKAGES.
STEP 11
Install two
"AA"
batteries into the
MONITOR(47),
two batteries included. Plug the
SPEED PICKUP
WIRE(23)
into the
MONITOR(47).
Slide the
MONITOR(47)
onto the
BRACKET
on the
MONITOR
POST(5).
See page 13 for detailed battery installation instructions.
9
