ASSEMBLY INSTRUCTIONS
11
STEP 15:
There is an
"L-L"
decal on the
LEFT-LEFT BASE COVER(77),
and an
"R-L"
decal on the
RIGHT-LEFT BASE COVER(78).
Attach the
LEFT-LEFT
and
RIGHT-LEFT BASE COVERS(77, 78)
to the
LEFT UPRIGHT(3).
There is an
"L-R"
decal on the
LEFT-RIGHT BASE COVER(79),
and an
"R-R"
decal on the
RIGHT-RIGHT
BASE COVER(80).
Attach the
LEFT-RIGHT
and
RIGHT-RIGHT BASE COVERS(79, 80)
to the
RIGHT
UPRIGHT(4).
L-R
R-R
L-L
R-L
To assemble the
RIGHT BASE COVERS(79, 80),
place the
LEFT-RIGHT BASE COVER(79)
at the inner
side of the
RIGHT UPRIGHT(4).
Place the
RIGHT-RIGHT BASE COVER(80)
at the outer side of the
RIGHT UPRIGHT(4)
and bolt the covers together with the
ROUND HEAD SCREWS(M4x20mm)(94).
Then
bolt the
LEFT-RIGHT BASE COVER(79)
to the
RIGHT UPRIGHT(4)
with
ROUND HEAD SCREW
(M5x0.8x20mm)(96).
Repeat on the left side.
STEP 16:
Attach the
RIGHT CHROMED PLATES(39)
to the
RIGHT SIDE HANDRAIL COVERS(38)
with
the hooks on the chromed plates. Be careful not to damage the hooks when attaching the
RIGHT CHROMED
PLATES(39).
Repeat to attach the
LEFT CHROMED PLATES(37)
to the
LEFT SIDE HANDRAIL COVERS
(36).
STEP 17:
Connect the
ADAPTER(121)
to the connector located on the back right end of the
RIGHT
COVER(8).
Plug the
ADAPTER(121)
into an electrical outlet.
