background image

COMPUTER INSTRUCTIONS

16

Displays flashing 

"35"

 for preseting the AGE for programs during setup, from 10 to 99.

Please note that although the computer allows input for ages beginning at 10 years old,
this product is not recommended for use by children.

Displays the Heart Rate, from 40 to 240 beats per minute.

NOTE:

  You must place both of your hands on the Heart Rate Sensors on the handrails

to input the pulse signal.  Each pulse signal will be accompanied with one " 

 

" symbol

flash.  If you do not place your hands correctly and eight (8) seconds passes without a
pulse input, the computer will turn off the pulse circuit.  Place your hands back on the
Heart Rate Sensors correctly, the Heart Rate readout will appear again.
Displays the BODY TYPE in Body Fat Program. (See page 21 for Body Type information.)

PROGRAM DESCRIPTIONS

This computer contains 15 different programmable workouts.  You can preset your exercise time and the
computer will divide the time into 10 intervals.  If you do not set the program time in advance, the computer
will use the preset value of 30 minutes.  In this case, you can preset the DISTANCE for the program to count
down.

(P1)  MANUAL

MANUAL PROGRAM:

  P1 is a manual program allowing the user to have

full manual control of the workload.  Use the 

"

"

 button to increase the

WATT

 of workload level.  Use the 

"

"

 button to decrease the 

WATT

 of

workload level.

PRESET PROGRAMS:

  P2 to P10 are preset automatic programs.  The profiles are shown on the face of

the computer.  Use the 

"

"

 button to increase the 

WATT

 of workload level of the program.  Use the 

"

"

button to decrease the 

WATT

 of workload level of the program.

(P2)  ROLLING

(P3)  VALLEY

(P5)  RAMP

(P6)  FITNESS TEST

(P4)  FAT BURN

(P7)  RANDOM

(P8)  PLATEAU

(P9)  INTERVALS

(P10)  MOUNTAIN

Displays the Target Heart Rate of programs during exercise, or the WATT of workload
level, from 40 to 400 watt.  Press 

"ENTER"

 button to select the display of Target Heart

Rate or WATT.

NOTE:

  The WATT readouts are the workload level of your current workout.  You can

use 

"

 

/

 

"

 buttons to adjust the WATT in any time during your workout.

Displays the BMI in Body Fat Program. (BMI is Body Mass Index. See page 21.)

Summary of Contents for EX 30
































Reviews: