Stamina fusion 15-4545, Owner'S Manual

USING THE FITNESS MONITOR OR METER

Remove the 

METER(27)

 from the 

METER POST(26).

Open the Battery Door on the back of the meter.
The 

METER(27)

 operates with four AA batteries (four batteries

included). Refer to the illustration to install or replace the batteries.
Reattach the 

METER(27)

 to the 

METER POST(26).

1.
2.
3.

4.

Do not mix a new battery with an old battery.
Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
Rechargeable batteries are not recommended.

1.
2.

3.

NOTE:

13

HOW TO INSTALL AND REPLACE BATTERIES:

Automatically scans each function of 

TIME, SPEED, DISTANCE,

CALORIES,

 and 

HEART

RATE 

in sequence with change every four seconds. Press and release the 

MODE

 button

until 

"SCAN"

 appears on the display.

Displays the time from one second up to 99:59 minutes.
Displays the current speed from zero to 999.9 miles per hour.
Displays the distance from zero to 99.99 miles.
Displays calories burned from zero to 999.9 Kcal.
The Calorie Display estimates the average user's calorie consumption based on the speed
and time of the workout. The Calorie Display is not affected by the load adjustment. It
should be used only as a comparison between workouts on this unit.
Displays your heart rate in beats per minute. To display heart rate, select the Heart Rate
Mode and grasp the 

PULSE SENSORS(41)

 on the 

HANDRAILS(6),

 one in each hand. The

heart symbol "

" will begin flashing when the 

METER(27)

 receives your heart rate reading.

Your heart rate will be displayed approximately five (5) seconds after the heart icon is
shown; however, if your hands aren't placed correctly on the 

PULSE SENSORS(41),

 you

will not see a heart rate on the display and the meter will cancel the heart rate circuit after
60 seconds. If this occurs, press the 

MODE

 button to restart, place your hands back on the

PULSE SENSORS(41)

 correctly with the palm on the sensors and the heart rate readout

will appear.

FUNCTIONS:

SCAN:

TIME:

SPEED:

DISTANCE:

CALORIES:

HEART RATE:

Pedal movement or push the 

MODE

 button.

Automatic shut off after four minutes of
inactivity.

POWER OFF :

POWER  ON :

MODE BUTTON:

Press to select display functions, include 

SCAN, TIME, SPEED,

DISTANCE, CALORIES,

 and 

HEART RATE.

Press and hold for three seconds to reset all functions to zero.

The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Push the 

MODE

 button and hold it down for three seconds to reset all functions to

zero.

NOTE:

OPERATIONAL INSTRUCTIONS

AA Batteries