ASSEMBLY INSTRUCTIONS
9
STEP 6
Refer to the inset drawing. Plug the
LEFT
and
RIGHT PULSE SENSOR WIRES(39, 40)
into the
REAR
EXTENSION WIRE(38)
located on the
REAR FRAME(3).
Push the plugs, only the plugs, back into the
opening in the
REAR FRAME(3).
Press the
SQUARE PLUG(46)
into the slot in the back of the
REAR
FRAME(3)
allowing the
LEFT
and
RIGHT PULSE SENSOR WIRES(39, 40)
to feed through the opening
created in the slot below the
SQUARE PLUG(46).
Please note that the slot is bigger than the
SQUARE
PLUG(46)
to allow room for the wires.
STEP 7
Attach the
SEAT(47)
to the
SEAT FRAME(5)
with
ROUND HEAD BOLTS(M6x1x15mm)(61).
Attach the
BACK CUSHION(48)
to the
SEAT FRAME(5)
with
BUTTON HEAD BOLTS(M8x1.25x40mm)(58).
Summary of Contents for fusion 15-4545
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Page 21: ...21 NOTES...
