20
STORAGE
1.
2.
3.
To store the
Magnetic Fusion 7250 Bike,
simply keep it in a clean dry place.
Adjust the
SEAT CARRIAGE(7)
to the lowest position. The
Magnetic Fusion 7250 Bike
is approximately
55 3/4 inches long x 24 3/8 inches wide x 50 3/8 inches tall (max.). These dimensions will vary. Please
measure your
Magnetic Fusion 7250 Bike
if exact dimensions are needed.
To move the
Magnetic Fusion 7250 Bike,
lift the
REAR STABILIZER(6)
and the bike will roll on the
WHEEL(62)
on the
FRONT STABILIZER(2).
MAINTENANCE
The safety and integrity designed into the
Magnetic Fusion 7250 Bike
can only be maintained when the
Magnetic Fusion 7250 Bike
is regularly examined for damage and wear. Special attention should be given
to the following:
Use the
PROGRAM BUTTONS
on the
COMPUTER(27)
to select a program and verify that the Magnetic
System provides different tensions. The Magnetic System should provide many years of use.
Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that the
left pedal has left hand threads and is tightened by turning counterclockwise. The right pedal has right
hand threads that are tightened by turning clockwise.
Verify that the
WARNING LABEL(109)
is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement
WARNING LABEL(109)
if it is missing or damaged.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged components shall be replaced immediately or the
Magnetic Fusion 7250 Bike
removed
from service until repair is made.
Only Stamina Products supplied components shall be used to maintain/repair the
Magnetic Fusion
7250 Bike.
Keep your
Magnetic Fusion 7250 Bike
clean by wiping it off with an absorbent cloth after use.
1.
2.
3.
4.
5.
6.
7.
