9
ASSEMBLY INSTRUCTIONS
To attach the
HANDRAIL(9),
position the
HANDRAIL(9)
under the
SEAT CARRIAGE(7)
as shown in the
above illustration and secure with
BUTTON HEAD BOLTS(M8x1.25x45mm)(71), ARC WASHERS(M8)
(98),
and
LOCK WASHERS(M8)(100).
STEP 8
Refer to the inset drawing. Plug the
PULSE SENSOR WIRE(55)
into the
SOCKET
of the
PULSE EXTENSION
WIRE(43)
located on the
SEAT RAIL(45).
STEP 7
NOTE:
The
PULSE SENSOR WIRES(55)
go through the tube of the
HANDRAIL(9).
Be careful not to
damage the wires
w
hen inserting the
BUTTON HEAD BOLTS(M8x1.25x45mm)(71)
through the
holes in the
HANDRAIL(9)
when attaching it to the
SEAT CARRIAGE(7).
Socket of Pulse
Extension Wire(43)
STEP 6
Attach the
SEAT FRAME(8)
to the
SEAT CARRIAGE(7)
with
BUTTON HEAD BOLTS(M10x1.5x200mm)(76),
WASHERS(M10)(99), LOCK WASHERS(M10)(101),
and
ACORN NUTS(M10x1.5)(97).
