Stamina InMotion 55-1602, Owner'S Manual

The  safety  and  integrity  designed  into  the 

InMotion® Elliptical

  can  only  be  maintained  when  the 

InMotion® Elliptical

 is regularly examined for damage and wear. Special attention should be given to 

the following:

STORAGE

MAINTENANCE

11

1.  To store the 

InMotion® Elliptical

 simply keep it in a clean dry place.

2.  The 

InMotion® Elliptical

 is approximately 24.3 inches long x 17 inches wide x 11.4 inches tall. These 

dimensions will vary. Please measure your 

InMotion® Elliptical

 if exact dimensions are needed.

3.  Grasp the 

REAR STABILIZER(2)

 to move the 

InMotion® Elliptical.

 Do not use the Pedal Arms to move 

the 

InMotion® Elliptical.

NOTE: 

A standard crank extractor tool is required to remove the 

CRANKS(68)

 from the 

AXLE(69).

1.  Adjust the 

TENSION KNOB(21)

 and verify that it functions properly and the resistance changes.

2.  Verify that the 

WARNING LABEL(55)

 is in place and easy to read. Call Stamina Products immediately 

at 

1-800-375-7520

 for a replacement 

WARNING LABEL(55)

 if it is missing or damaged.

3.  It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

4.  Worn or damaged components shall be replaced immediately or the 

InMotion® Elliptical

 removed 

from service until repair is made.

5.  Only  Stamina  Products  supplied  components  shall  be  used  to  maintain/repair  the 

InMotion® 

Elliptical.

6.  Keep your 

InMotion® Elliptical

 clean by wiping it off with an absorbent cloth after use.