ASSEMBLY INSTRUCTIONS
7
STEP 4
Attach the
SEAT(43)
to the
SEAT FRAME(5)
with
HEX BOLTS(M8x1.25x20mm)(64)
and
WASHERS(M8)
(75).
Pull the
ADJUSTMENT KNOB(41),
then insert the
SEAT FRAME(5)
into the
MAIN FRAME(1)
and
secure with the
ADJUSTMENT KNOB(41).
NOTE:
It may be necessary to unscrew the
ADJUSTMENT KNOB(41)
slightly to insert the
SEAT FRAME(5).
Make sure that the pin on the
ADJUSTMENT KNOB(41)
is inserted into one of the holes in the
SEAT FRAME(5).
The
ADJUSTMENT KNOB(41)
should be screwed in tight to make the
SEAT FRAME(5)
fit securely
in the
MAIN FRAME(1).
1.
2.
3.
STEP 5
Attach the
BACK SUPPORT(6)
to the
SEAT FRAME(5)
by sliding the slots in the end of the
BACK
SUPPORT(6)
onto the pegs on the
SEAT FRAME(5)
and securing with
CARRIAGE BOLT(M8x1.25x85mm)
(57), SPACER(80) ,WASHER(M8)(75),
and the
LOCKING KNOB(45).
STEP 6
Attach the
HANDRAIL(7)
onto the
SEAT FRAME(5)
with
HEX BOLTS(M8x1.25x40mm)(65)
and
ARC
WASHERS(M8)(74).
Peg