OPERATIONAL INSTRUCTIONS
9
LOAD ADJUSTMENT
To increase the load, turn the
TENSION KNOB(10)
clockwise.
To decrease the load, turn the
TENSION KNOB(10)
counterclockwise. There are eight levels for the load adjustment.
INSTALL AND REPLACE BATTERY FOR THE TRANSMITTER:
1. Turn off the
TRANSMITTER(33).
2. Use a coin to open the Battery Cover on the
TRANSMITTER(33).
3. The
TRANSMITTER(33)
operates with a CR2032 button battery.
Refer to the illustration to install or replace the battery.
4. Use a coin to close the Battery Cover onto the
TRANSMITTER(33).
1.
Turn on the TRANSMITTER(33) before using the
METER(17).
2. Ultimate disposal of battery should be handled
according to all state and federal laws and regulations.
3. Do not dispose of batteries in fire.
NOTE:
Transmitter(33)
Turn off the
switch.
Button Battery
Battery Cover
close
open
