STAMOS S-LS-12, User Manual

EN

7

CAUTIONS

General safety information for the use of electrical devices:

To avoid injury from fire or electric shock, please ensure compliance with safety instructions when using this device. Please 
read the instruction carefully and make sure that you have understood it well. Keep the manual near the equipment to 

be able to read it at any time. Always use current sources connected to the ground and providing the necessary voltage 
(indicated on the label on the device). If you have any doubt, let an electrician check that your outlet is properly grounded. 
Never use a damaged power cable. Do not open the unit in damp or wet environment, or if you are wet yourself. Protect 
the unit of solar radiation. Use the device in a protected location to avoid damaging the equipment or endangering others. 
Make sure the device is able to cool and avoid placing it too close to other devices that produce heat. Before cleaning, 
disconnect it. Use a soft damp cloth for cleaning. Avoid using detergent and make sure that no liquid enters the unit. No 
internal element of this device needs to be maintained by the user. An opening of the device without our approval leads to 
a loss of warranty. 

General safety information for the use of the device:
• 

The user manual should be kept close to the device and should always be accessible for the users. Instruct your 
employees how to use the device properly. 

• 

Make sure the hot air can circulate well and place the device more than10 cm away from walls and other electrical 
devices. Aerate well the working area.

• 

Do not place the device close to combustible materials.

• 

It may happen that by first use, the heating element produces a light smoke. This is absolutely normal. Simply check 

that the smoke can evaporate and that a good aeration is provided.

• 

Some parts of the device can get extremely hot. To avoid any injuries, be careful by every contact with the device.

• 

Clean the device regularly to avoid a durable encrustation of dirt.

TECHCNICAL DETAILS

Model

6111 S-LS-12

Voltage (V)

230 ~ 50Hz

Rated current (A)

1

Power (W)

65

Work temperature (

⁰

C)

0/+40

Storage temperature (

⁰

C)

-20 / +80

Storage humidity

35 - 45%

SOLDERING IRON

Output power (W)

60

Temperature range (

⁰

C)

200 - 480

Tip resistance to ground

< 2ohm

Tip-to-ground voltage

< 2mV

Temperature stability

± 2°C

USAGE PURPOSE

The device is designed for:

Different kind of soldering, de-soldering of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc.

Any damage resulting from a non-conform use of the device is payable by the user!