EN
14
SMD REWORK STATION
Temperature range (
⁰
C)
100-480
100-450
Output power (W)
650
Temperature Stability
±1
⁰
C
±2
⁰
C/±1
⁰
C
Airflow (L/min)
120
USAGE PURPOSE
The device is designed for:
1. Different kind of soldering, de-soldering of the electronic components such as:
SOIC, CHIP, QFP, PLCC, BGA, SMD, etc.
2. Shrinking, paint drying, adhesive removal, thawing, warming, plastic welding.
Any damage resulting from a non-conform use of the device is payable by the user!
PRINCIPLE OF OPERATION
Assembly:
6101| S-LS-2:
1. on/off switch of the SMD rework station
2. SMD rework gun cable
3. soldering iron connection socket
4. on / off switch of the soldering station
5. function button
6. buttons for the temperature setting
7. soldering iron temperature display
8. SMD rework gun temperature display
9. airflow volume adjustment knob
EN
15
1. on / off switch of the SMD rework station
2. SMD rework gun cable
3. soldering iron connection socket
4. on / off switch of the soldering station
5. soldering iron temperature setting knob
6. soldering iron heater indicator
7. SMD rework gun temperature display
8. buttons for the temperature setting
9. airflow volume adjustment knob
BEFORE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging
is damaged, please contact your transport company and distributor within 3 days, and
document the damages as detailed as possible. Do not turn the package upside down!
When transporting the package, please ensure that it is kept horizontal and stable. Ple-
ase keep all packaging materials (cardboard, plastic tapes and styrofoam), so that in case
of a problem, the device can be sent back to the service centre in accurate condition.
Disposing of packaging
The various items used for packaging (cardboard, plastic straps, polyurethane foam)
should be conserved, so that the device can be sent back to the service center in best
conditions in case of problem!
INSTALLING THE APPLIANCE
Appliance location
The work surface where the device will be located must be suitable for the size of the
appliance, please refer to the measurements. The work surface must be levelled, dry,
heat-resistant and at a fitting height from the ground to enable a proper use of the
device.
The power cord connected to the appliance must be properly grounded and corres-
pond to the technical details.
5
4
1
2
3
9
8
7
6
8
9
1
2
3
4
5
6
7
