Stamp stunt JB246, Instructions On Assembly And Use

4

EN - INSTRUCTIONS ON ASSEMBLY AND USE

Please read these instructions carefully. The instructions are an integral component of 

the product. 

Therefore, please store them and the packaging carefully in case questions arise in the 

future.

Please always include these instructions when you are handing on the product to a 

third-party. Children should only assemble, use or repair the product when they are 

under adult supervision. 

CONTENTS

         •  2 x Allen keys (to fix the handlebar rod)

         •  1 x scooter

         •  1 x user‛s guide

ASSEMBLY 

:  Insert the steering tube in the frame and tighten the screws.

                           Ensure to tighten the clamp screws to the end.

GENERAL INFORMATION

The product should be assembled under adult supervision only. In order to assemble it 

correctly,

please read the step-by-step instructions carefully. Mistakes made when assembling the 

scooter could lead to an injury to the user or others.

Please also take care to follow the step-by-step assembly instruction points. Do not make 

any other modification than those detailed in this instruction sheet.

User maximum weight: 100kg         

WARNING NOTICE

•  This item is not a toy, it belongs to the category Roller sports equipment (EN14619:2015)

•  The user must check the scooter‛s limits of use according to the local Road safety 

    regulations.

•  Use the scooter on even, dry and smooth surfaces, if possible away from other users.

•  Avoid riding nearby stairs, rivers and swimming pools.

•  Avoid slopes too steep and before use check that the brake is operating correctly.

•  For your security, wear appropriate protective gear: helmet, elbow / knee / wrist-pads.

•  Before start: check that the steering system is correctly adjusted and that all 

   fasteners and locking parts are securely fitted.

•  Proper use: the scooter is designed for one person at a time. It is not adapted to jump 

   or any other acrobatic use. The handlebar must be held with both hands.

•  Braking techniques: with the foot used to push, step on the friction brake over the rear 

   wheel (mudguard).

   Brakes can heat when used. Wait they cool off before touching them.

•  Never ride barefoot: closed shoes are to be preferred.

•  Do not ride at night or when light is dim or with poor visibility condition.

MAINTENANCE AND CARE

A regular maintenance of the product is a security factor.

Check regularly that all fasteners and locking parts are fitted securely because nuts 

as well as other fastening devices may be impaired after a while.

VV2017-03-28