8
FUJITSU MODEL F50 DISPENSER LOADING – Rear load machines (door on back of machine) utilize
a “slide” and “rotate” plate for optimum access for bill loading. Front load machines do use a slide only.
They do not include the rotate plate.
STEP 1
- Slide / pull dispenser out as far as it
will go.
STEP 2
- Swivel the dispenser (rear loads only) to
allow additional bill
compartment access.
STEP 3
– Open the bill compartment door of the
dispenser.
STEP 4
– Slide the pressure plate back and snap
into position.
STEP 5
– Load bills so they are standing on end. Release the pressure plate so the bills are
pushed forward.
