29
5.13
Stringing Detection Level (Feature Type = Machine)
Default Settings = Medium
LOW
– Only validator detection will be used. If the validator detects a possible stringing attempt it will
not issue credits. The System Controller will ignore all MDB codes that may indicate a possible stringing
attempt.
MEDIUM
– The Device will ignore MDB codes that may indicate possible a stringing attempt only when
there are no credits. If there are credits or a payout is in progress, the changer will shut down with a bill
acceptor error. No further transactions will occur until the machine is reset either manually or with the
Auto Reset feature.
HIGH
– The Device will go offline if any MDB codes that may indicate a possible stringing are received.
The changer will shut down with a bill acceptor error. No further transactions will occur until the machine
is reset either manually or with the Auto Reset feature. False errors may occur if bills are rapidly fed into
the machine.
5.14
Count Out Items (Feature Type = Device)
Default Settings = Dollars
This feature is only necessary if you wish to count the number of items dispensed rather than the dollar
amount dispensed.
5.15
No Bill Acceptor Shutdown (Feature Type = Machine)
Default Settings = NO
Available in software version 01.037 or newer
This setting can be used to force the machine offline (out of service) if the bill acceptor is no longer
available to accept bills as a result of an error condition. The default setting will keep the machine online
if another type of acceptor is available; for example, a coin acceptor is present.
5.16
No Coin Acceptor Shutdown (Feature Type = Machine)
Default Settings = NO
Available in software version 01.037 or newer
This setting can be used to force the machine offline (out of service) if the coin acceptor is no longer
available to accept coins as a result of an error condition. The default setting will keep the machine online
if another type of acceptor is available; for example, a bill acceptor is present.
