15
Horizon GPS Chart400 User Manual
travels within the arrival circle of any Danger waypoint the alarm will sound. These waypoints
can not be disabled and the user can not GoTo them or included them in any route.
Strictly speaking, there is a third type of waypoint known as a Mark. Marks do not have all the
attributes of normal waypoints but they do have very similar characteristics. Positions on charts can
be saved by using Marks. These symbols are used to mark a location of interest. This is a simple way
of marking a spot on the chart without creating a full waypoint. There are four symbols to choose
from. It is not possible to name them or edit them and the lat\lon is not displayed. However, Marks
can be converted to full waypoints. See Section 3.23, Converting Marks to Waypoints. Marks also
remain on the chart until deleted and you are able to GoTo them.
Waypoint Screen
Pressing the Waypts key in the main Waypoint screen will produce one of two possible screens.
If the Waypts key is pressed when the cursor is
not
positioned over a waypoint the following
screen appears
If the Waypt key is pressed when the cursor is
positioned over a waypoint the following screen
appears, to edit or modify the existing waypoint.
Zoom In
Zoom In
Zoom Out
Zoom Out
3 6 4 8 . 1 7 3 S
3 6 4 8 . 1 7 3 S
1 7 4 4 2 . 9 9 6 E
1 7 4 4 2 . 9 9 6 E
!
!
Routes
Dist
B R G
D I S T 0.86m
3 4 5
+ WPT002
+ WPT002
Waypts
3 6 4 8 . 1 7 3 S
3 6 4 8 . 1 7 3 S
1 7 4 4 2 . 9 9 6 E
1 7 4 4 2 . 9 9 6 E
!
!
+ WPT002
+ WPT002
Edit
Move
Delete
Create
List
Zoom In
Zoom In
Zoom Out
Zoom Out
3 6 4 8 . 1 7 3 S
3 6 4 8 . 1 7 3 S
1 7 4 4 2 . 9 9 6 E
1 7 4 4 2 . 9 9 6 E
!
!
Routes
Dist
B R G
D I S T 0.86m
3 4 5
+ WPT002
+ WPT002
Waypts
3 6 4 8 . 1 7 3 S
3 6 4 8 . 1 7 3 S
1 7 4 4 2 . 9 9 6 E
1 7 4 4 2 . 9 9 6 E
!
!
+ WPT002
+ WPT002
Create
List
Save +
Save +
Save
Find