17
Horizon GPS Chart400 User Manual
Creating a waypoint by entering the latitude and longitude
Zoom In
Zoom In
Zoom Out
Zoom Out
3 6 4 8 . 1 7 3 S
3 6 4 8 . 1 7 3 S
1 7 4 4 2 . 9 9 6 E
1 7 4 4 2 . 9 9 6 E
!
!
Routes
Dist
B R G
D I S T 0.86m
3 4 5
+ WPT002
+ WPT002
Waypts
1. Select
from the main
screen to display the
waypoint options.
Waypt
Waypoints
2. Press the
key to display
a new waypoint edit window.
Create
3. Enter a name and lat/lon for the
new waypoint. Press the
key to save the new waypoint to
memory.
Save
3 6 4 8 . 1 7 3 S
3 6 4 8 . 1 7 3 S
1 7 4 4 2 . 9 9 6 E
1 7 4 4 2 . 9 9 6 E
!
!
+ WPT002
+ WPT002
List
+
Find
Save +
Save +
Save
Create
!
Lat
Lon
Danger: N
Danger: N
W P T 0 0 3
36 48.173
36 48.173
174 42.996
174 42.996
Cancel
Save
Waypoint Editing Functions
There are a number of ways of changing existing waypoints. You can change the name, lat/lon,
danger status or waypoint type by positioning the cursor over the waypoint and pressing the Edit key.
You can also delete a waypoint in the same manner by positioning the cursor over the waypoint and
pressing the Delete key. These functions are accessed from the Waypoint screen.
To change the name, lat/lon or danger status of a waypoint the Edit Waypoint screen must be
displayed. An example of this is shown in step 3 above. Other methods of displaying the Edit Waypoint
screen are described throughout this section. Initially, when the Edit Waypoint screen is first displayed
the name of the waypoint is highlighted with reverse video. At this point you can use the cursor keys
to select the name, lat/lon or danger fields. Once you have selected the required field press the Edit
softkey to start the editing process. To change the contents of the field press the right or left cursor
key to highlight the appropriate letter or number and then press the up or down cursor key to step
through the alphabet to the required letter or number. After completing the changes press the ENTER
softkey to move to the next field. Once all changes have been completed press the Save softkey to
save the changes to memory.
Converting Marks to Waypoints
With the Waypoint screen displayed, Marks can be converted to full waypoints by positioning the
cursor over the Mark. Press the Waypts softkey to access the various edit functions. Press the
Convert softkey to convert the Mark to a full waypoint.